Passed Avaya 6102 Exam with Pass4sure and Lead2pass PDF & VCE

July 21, 2014

Vendor: Avaya
Exam Code: 6102
Exam Name: Avaya Virtual Services Platform 9000 Implementation Exam

A customer is concerned about the security of their network. They need to understand the OSPF authentication options when accepting route updates in OSPF. Currently, their Virtual Service Platform (VSP) 9000 is configured to require no authentication when receiving the OSPF updates.
Which two supported authentication types would provide security on the VSP 9000 for OSPF updates? (Choose two.)

A.    MD5
B.    3DES
D.    Simple Password

Answer: AD

The following ACLI commands are used to set up an MLT on the Virtual Services platform (VSP) 9000 and the last command in this sequence produces an ACLI error.
VSP-9012:1 (config) # mlt 1
VSP-9012:1 (config) # mlt 1 name IST
VSP-9012:1 (config) # mlt 1 member 3/1, 3/2
VSP-9012:1 (config) # mlt 1 vlan 2, 10, 11, 12
What should be done to correct the problem?

A.    Set up the IST on the other VSP 9000 before adding the VLANs.
B.    Add port members 3/1, 3/2 to each of the VLANs before adding them to the MLT.
C.    Specify that the MLT is using encapsulation dot1q.
D.    Assign the IST peer-ip before adding the VLANs.

Answer: A

A customer is expressing concern about reliability for their single uplink connections to the wiring closet. The switches in the wiring closet support Distributed Multi link Trunking (DMLT).
What can be done so the Virtual Services Platform (VSP) 9000 can eliminate a single point of failure for the lowest cost?

A.    Add a second switch fabric module.
B.    Duplicate the trunk elements in software.
C.    Duplicate the trunks across separate modules using DMI T.
D.    Configure multiple VSP 9000 switches using Split Multi-Link Trunking (SMLT).

Answer: C

A technician is successful when using the ping command on a Virtual Services Platform (VSP)
9000 to the peer VSP 9000 configured as a switch cluster. The IST is operating correctly. It has been reported that OSPF is not operating correctly since the switches have not become OSPF neighbors.
Which parameters should be considered in locating the issue?

A.    Verify that OSPF is turned on globally and on the routing interface to the peer.
B.    Check that the poor switch has been manually configured as a neighbor.
C.    The two VSP 9000 switches do not become OSPF neighbors in a switch cluster.
D.    An accept policy is requited on each VSP 9000 for OSPF communication across the IST.

Answer: A

In a fully populated Virtual Services Platform (VSP) 9000 with 10 I/O modules, what is the required number of Switch Fabric (SF) modules to allow full throughput?

A.    OneSF module in slot 1
B.    OneSF module in slot 4
C.    TwoSF modules in slots 1 and 4
D.    FiveSF modules
E.    SixSF modules

Answer: D

The Virtual Services Platform (VSP) 9000 has several management Tools available that can be used for installation and configuration.
Which three Tools are web-based applications that can be used for configuration? (Choose three.)

A.    Avaya Command Line Interface (ACLI)
B.    Unified communication Manages (UCM)
C.    Enterprise Device Manager (COM)
D.    Common Orchestration manager (COM)
E.    Java Device Manager (JDM)

Answer: CD

Which ACLI command is used to allow the non-secure (HTTP) web interface?

A.    web enable
B.    web secure disable
C.    no web secure
D.    config web secure enable

Answer: C

What must be done, before the SNMPv3 can be used with Data encryption Standard (DES) or Advanced Encryption Standard (At S) to across the device?

A.    Configure SNMPv1.
B.    Configure the SNMP-server location.
C.    Create a Filter.
D.    Load the appropriate SNMPv3encryption module.

Answer: D

If you want to pass Avaya 6102 successfully, donot missing to read latest lead2pass Avaya 6102 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

Powered by Wordpress and MySQL. Theme by Shlomi Noach,